Is a c6 transmission manual?

The C6 is on a par with GM’s Turbo- Hydramatic 400 and Chrysler’s 727 Torqueflite transmissions. It is a heavyduty 3-speed automatic transmission designed primarily for high-power V-8 engines and employs a conventional, non-locking torque converter.

Is a C6 transmission automatic or manual?

Design. To cut down on weight and cost, the C6 featured a simple, three speed Simpson planetary gearset. To aid in shift quality and long term durability, it was the first automatic transmission designed to use the Borg-Warner flexible shift band. It had disc clutch plates instead of bands on the low and reverse gears.

How does a C6 transmission shift?

The governor feed oil is produced by road speed or the vehicle moving. When governor feed oil gets high enough, it will override the opposing oil and the 1-2 shift valves will stroke, thus making the transmission shift from first to second.

Is a C6 transmission a 4 speed?

Transmission Types

The C6 is a non-electronic, three-speed transmission. The AOD features a four-speed, non-electronic transmission. It was not until 1992 that Ford introduced the electronic version of the AOD, the AODE.

Is the Ford C6 transmission good?

The C6 was produced with four basic bell-housing bolt patterns over its long production life and is a very rugged transmission designed for high-power applications.

THIS IS INTERESTING:  What keeps an automatic transmission from stalling out?

How do I identify a C6 transmission?

Determine where the speedometer driver gear is located. If it is on the driver’s side of the extension housing, it is the C6 but a C4, if it is at the rear of the transmission at the point, then driveshaft is connected to the transmission’s back.

Will a C6 bolt up to a 302?

It is possible to fit a c6 with a smallblock bellhousing pattern FE pattern, but it is not the same. It should be able to handle a 302 with a mild cam, a 4 bbl intake, and a good set of headers.

How much power can a C6 transmission handle?

The new planetaries bring the transmission’s rating to more than 2,000 hp, provided the input shaft has been swapped. Like all aftermarket transmission builds, the new clutch packs have better surface material and additional clutches for greater gripping power.

Does a C6 transmission have overdrive?

Adding overdrive to a C6 is physically impossible, but the 4R100 can donate its forward planetary gear set for shorter first and second gear ratios. This creates a “wide-ratio” C6.

How can I improve my C6 transmission?

You can try the following to beef up the performance of your C6 transmission:

  1. Custom Parts. …
  2. Valve Body Upgrades. …
  3. Bell Housings. …
  4. C6 Planetary Carriers. …
  5. First and Reverse Planetary Gearset. …
  6. Lincoln Drum. …
  7. Aftermarket Clutches. …
  8. Gear Ratios.

What’s better C4 or C6 transmission?

The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.

THIS IS INTERESTING:  Is the 47re a good transmission?

How many speeds does a C6 transmission have?

Produced from 1966–1996, the Ford C6 transmission is a heavy duty 3-speed automatic gearbox that saw use in some of the Blue Oval’s most popular models.